CEL CGW-Z-0010 vs DIY ptvo.router
Side-by-side Zigbee platform compatibility for two routers — see exactly what each one works with.
Platform support compared
| Platform | CEL CGW-Z-0010 | DIY ptvo.router |
|---|---|---|
| ZHA (Home Assistant) | ✓ | ✓ |
| Zigbee2MQTT | ✓ | ✓ |
| deCONZ | ✓ | ✓ |
| Zigbee2Tasmota | ✓ | ✗ |
| ioBroker | ✗ | ✓ |
| Zigbee for Domoticz | ✓ | ✓ |
| iHost | ✗ | ✗ |
Both the CEL CGW-Z-0010 and the DIY ptvo.router work with 5 platforms. They share ZHA (Home Assistant), Zigbee2MQTT, deCONZ, Zigbee for Domoticz. Only the CEL CGW-Z-0010 adds Zigbee2Tasmota. Only the DIY ptvo.router adds ioBroker.
Recommended Zigbee coordinators
Either device needs a Zigbee coordinator to join your network. These are the ones we'd buy:
As an Amazon Associate, WillItPair earns from qualifying purchases. This doesn't affect what you pay.
Frequently asked questions
What's the difference between the CEL CGW-Z-0010 and the DIY ptvo.router?
Both the CEL CGW-Z-0010 and the DIY ptvo.router work with 5 platforms. They share ZHA (Home Assistant), Zigbee2MQTT, deCONZ, Zigbee for Domoticz. Only the CEL CGW-Z-0010 adds Zigbee2Tasmota. Only the DIY ptvo.router adds ioBroker. Both are Zigbee routers, so the practical difference for most people comes down to which smart-home platform they each support.
Can I use the CEL CGW-Z-0010 and the DIY ptvo.router on the same hub?
Yes. Both are supported by ZHA (Home Assistant), Zigbee2MQTT, deCONZ, Zigbee for Domoticz, so you can run them side by side on the same Zigbee coordinator and bridge.
Does the CEL CGW-Z-0010 work with Home Assistant?
Yes — the CEL CGW-Z-0010 works in Home Assistant via the ZHA integration.
Does the DIY ptvo.router work with Home Assistant?
Yes — the DIY ptvo.router works in Home Assistant via the ZHA integration.