JUNG ZLL 5004 M Compatibility

Transmitter Module 4-gang · switch Zigbee

JUNG ZLL 5004 M — Transmitter Module 4-gang

The JUNG ZLL 5004 M (Transmitter Module 4-gang) is a Zigbee switch / relay from JUNG. It controls a connected load or circuit, letting you automate lighting and powered devices from your smart-home hub. It's confirmed working across 3 platforms, including Zigbee2MQTT, deCONZ, ioBroker. Because it speaks standard Zigbee, the JUNG ZLL 5004 M pairs with any Zigbee coordinator once it's joined to one of the supported bridges above.

Compatibility at a glance

JUNG ZLL 5004 M is a Zigbee switch from JUNG. It is compatible with: Zigbee2MQTT, deCONZ, ioBroker.

ZHA (Home Assistant)✗ Not supported
Zigbee2MQTT✓ Supported
deCONZ✓ Supported
Zigbee2Tasmota✗ Not supported
ioBroker✓ Supported
Zigbee for Domoticz✗ Not supported
iHost✗ Not supported

Where to buy the JUNG ZLL 5004 M

The JUNG ZLL 5004 M is widely available on Amazon in the US, UK, Canada and across Europe. Prices and stock vary by region — the link below opens results for your local Amazon store.

⚡ Check your region: in-wall devices follow local wiring standards — pick the version sold for your country (US/UK/EU).

🔎 Find the JUNG ZLL 5004 M on Amazon →

As an Amazon Associate, WillItPair earns from qualifying purchases. This doesn't affect what you pay.

Recommended Zigbee coordinators

The JUNG ZLL 5004 M needs a Zigbee coordinator (USB stick) to join your network. These are the ones we'd buy:

🟢SONOFF Zigbee 3.0 USB Dongle PlusMost popular all-rounder — works with ZHA, Zigbee2MQTT & moreView on Amazon →Also on AliExpress →
🏠Home Assistant Connect ZBT-1Official Home Assistant coordinator (formerly SkyConnect)View on Amazon →Also on AliExpress →
🔵ConBee IIRock-solid choice for deCONZ / Phoscon setupsView on Amazon →

As an Amazon Associate, WillItPair earns from qualifying purchases. This doesn't affect what you pay.

Frequently asked questions

Does the JUNG ZLL 5004 M work with Home Assistant?

It is not natively supported by Home Assistant's ZHA integration, but you can use it via Zigbee2MQTT (Z2M) if Z2M support is listed below. It also works through Zigbee2MQTT.

Is the JUNG ZLL 5004 M compatible with Zigbee2MQTT?

Yes, the JUNG ZLL 5004 M is supported by Zigbee2MQTT.

What Zigbee hub do I need for the JUNG ZLL 5004 M?

Any Zigbee coordinator paired with one of the supported bridges (Zigbee2MQTT, deCONZ, ioBroker) will let you use this device. A SONOFF Zigbee dongle or a ConBee II are common choices.