Dry Contact Module · switch Zigbee
The Orvibo CM10ZW (Dry Contact Module) is a Zigbee switch / relay from Orvibo. It controls a connected load or circuit, letting you automate lighting and powered devices from your smart-home hub. It's confirmed working across 3 platforms, including ZHA (Home Assistant), deCONZ, Zigbee for Domoticz. Because it speaks standard Zigbee, the Orvibo CM10ZW pairs with any Zigbee coordinator once it's joined to one of the supported bridges above.
Orvibo CM10ZW is a Zigbee switch from Orvibo. It is compatible with: ZHA (Home Assistant), deCONZ, Zigbee for Domoticz.
| ZHA (Home Assistant) | ✓ Supported |
| Zigbee2MQTT | ✗ Not supported |
| deCONZ | ✓ Supported |
| Zigbee2Tasmota | ✗ Not supported |
| ioBroker | ✗ Not supported |
| Zigbee for Domoticz | ✓ Supported |
| iHost | ✗ Not supported |
The Orvibo CM10ZW is widely available on Amazon in the US, UK, Canada and across Europe. Prices and stock vary by region — the link below opens results for your local Amazon store.
⚡ Check your region: in-wall devices follow local wiring standards — pick the version sold for your country (US/UK/EU).
🔎 Find the Orvibo CM10ZW on Amazon →As an Amazon Associate, WillItPair earns from qualifying purchases. This doesn't affect what you pay.
The Orvibo CM10ZW needs a Zigbee coordinator (USB stick) to join your network. These are the ones we'd buy:
As an Amazon Associate, WillItPair earns from qualifying purchases. This doesn't affect what you pay.
Yes. The Orvibo CM10ZW is supported in Home Assistant — natively through the ZHA integration.
No, this device is not currently listed as supported by Zigbee2MQTT.
Any Zigbee coordinator paired with one of the supported bridges (ZHA (Home Assistant), deCONZ, Zigbee for Domoticz) will let you use this device. A SONOFF Zigbee dongle or a ConBee II are common choices.